Midi Winch Lifter

Model number: WG-ELIM 250 150
Delivered in 15


The Midi range of general purpose lifters is ideal for many locations and uses, particularly where the 1500mm lift height is required.

Fitted with rear castors and total stop brakes for full stability.

Wheels: 2 x 125mm dia. nylon wheels with polyurethane tyres and ball bearings. Castors tted with total stop brakes as standard. The front of the straddle legs are tted with cast iron rollers.

Winch: Enclosed sprocket and chain drive, guarded for operator protection. Manual winch unit with self sustaining feature to hold the load at any level when the lever is released.

Load retention frame: All midi models are supplied with load retention frame tted as standard. Frame incorporates anchor points for load retention straps.

Finish: Main frame and masts in orange powder coating. Forks, carriage and retention frame nished in grey powder coating.

Documentation: All Ezi-Lift lifting devices are supplied complete with instructions covering the use of the machine, maximum load labels or plates, recommended load centres, data sheets on Health & Safety together with a signed Test Certi cate and declaration of conformity. All lifting equipment supplied complies to the Supply of Machinery (Safety) Regulations 1992 No: 3073 and subsequent Amendment 1994 No:2063 IMPORTANT Always ensure the load is in the fully lowered position before moving the lifter.


Product code WG-ELIM 250 150
Maximum Lift 1500mm
Maximum Load (kg) 250kg
Weight (kg) 60kg
Width (mm) 640
Need help ordering or advice?

If you need advice or assistance with any of our products please call the team on 01527 883602

To email your enquiry please click here